Thursday, 26 September 2013
Saturday, 14 September 2013
You think you are the best programmer out there? Well here are some challenges!
| ||||||
Friday, 13 September 2013
ஹைக்கூ(Hikoo) கவிதை- உனக்காக அங்கு நான்..
கவலைகள் உன்னை
நோகடிக்கும் பொழுது
உன் விழியோரம்
வழியும் நீர்த்துளி
துடைக்க
உனக்காக அங்கு நான்...!
நோகடிக்கும் பொழுது
உன் விழியோரம்
வழியும் நீர்த்துளி
துடைக்க
உனக்காக அங்கு நான்...!
ஹைக்கூ(Hikoo) கவிதை ~ நான்
உன் கண்ணீருக்கு
காரணம்
நானாயிருக்க கூடாது...
உன் கண்ணில்
நீர் வருமென்றால்...
அன்று
நானேயிருக்க கூடாது...!
காரணம்
நானாயிருக்க கூடாது...
உன் கண்ணில்
நீர் வருமென்றால்...
அன்று
நானேயிருக்க கூடாது...!
Saturday, 7 September 2013
Thursday, 5 September 2013
Wednesday, 4 September 2013
C Aptitude Questions and Answers(Part-2)
Predict the output or error(s) for the following:
36. main()
{
int i;
printf("%d",scanf("%d",&i)); // value 10 is given as input here
}
Answer:
1
Explanation:
Scanf returns number of items successfully read and not 1/0. Here 10 is given as input which should have been scanned successfully. So number of items read is 1.
36. main()
{
int i;
printf("%d",scanf("%d",&i)); // value 10 is given as input here
}
Answer:
1
Explanation:
Scanf returns number of items successfully read and not 1/0. Here 10 is given as input which should have been scanned successfully. So number of items read is 1.
37. #define f(g,g2) g##g2
main()
{
int var12=100;
printf("%d",f(var,12));
}
Answer:
100
main()
{
int var12=100;
printf("%d",f(var,12));
}
Answer:
100
38. main()
{
int i=0;
for(;i++;printf("%d",i)) ;
printf("%d",i);
}
Answer:
1
Explanation:
before entering into the for loop the checking condition is "evaluated". Here it evaluates to 0 (false) and comes out of the loop, and i is incremented (note the semicolon after the for loop).
{
int i=0;
for(;i++;printf("%d",i)) ;
printf("%d",i);
}
Answer:
1
Explanation:
before entering into the for loop the checking condition is "evaluated". Here it evaluates to 0 (false) and comes out of the loop, and i is incremented (note the semicolon after the for loop).
39. #include
main()
{
char s[]={'a','b','c','\n','c','\0'};
char *p,*str,*str1;
p=&s[3];
str=p;
str1=s;
printf("%d",++*p + ++*str1-32);
}
Answer:
M
Explanation:
p is pointing to character '\n'.str1 is pointing to character 'a' ++*p meAnswer:"p is pointing to '\n' and that is incremented by one." the ASCII value of '\n' is 10. then it is incremented to 11. the value of ++*p is 11. ++*str1 meAnswer:"str1 is pointing to 'a' that is incremented by 1 and it becomes 'b'. ASCII value of 'b' is 98. both 11 and 98 is added and result is subtracted from 32.
i.e. (11+98-32)=77("M");
main()
{
char s[]={'a','b','c','\n','c','\0'};
char *p,*str,*str1;
p=&s[3];
str=p;
str1=s;
printf("%d",++*p + ++*str1-32);
}
Answer:
M
Explanation:
p is pointing to character '\n'.str1 is pointing to character 'a' ++*p meAnswer:"p is pointing to '\n' and that is incremented by one." the ASCII value of '\n' is 10. then it is incremented to 11. the value of ++*p is 11. ++*str1 meAnswer:"str1 is pointing to 'a' that is incremented by 1 and it becomes 'b'. ASCII value of 'b' is 98. both 11 and 98 is added and result is subtracted from 32.
i.e. (11+98-32)=77("M");
40. #include
main()
{
struct xx
{
int x=3;
char name[]="hello";
};
struct xx *s=malloc(sizeof(struct xx));
printf("%d",s->x);
printf("%s",s->name);
}
Answer:
Compiler Error
Explanation:
Initialization should not be done for structure members inside the structure declaration
main()
{
struct xx
{
int x=3;
char name[]="hello";
};
struct xx *s=malloc(sizeof(struct xx));
printf("%d",s->x);
printf("%s",s->name);
}
Answer:
Compiler Error
Explanation:
Initialization should not be done for structure members inside the structure declaration
41. #include
main()
{
struct xx
{
int x;
struct yy
{
char s;
struct xx *p;
};
struct yy *q;
};
}
Answer:
Compiler Error
Explanation:
in the end of nested structure yy a member have to be declared
main()
{
struct xx
{
int x;
struct yy
{
char s;
struct xx *p;
};
struct yy *q;
};
}
Answer:
Compiler Error
Explanation:
in the end of nested structure yy a member have to be declared
42. main()
{
extern int i;
i=20;
printf("%d",sizeof(i));
}
Answer:
Linker error: undefined symbol '_i'.
Explanation:
extern declaration specifies that the variable i is defined somewhere else. The compiler passes the external variable to be resolved by the linker. So compiler doesn't find an error. During linking the linker searches for the definition of i. Since it is not found the linker flags an error.
{
extern int i;
i=20;
printf("%d",sizeof(i));
}
Answer:
Linker error: undefined symbol '_i'.
Explanation:
extern declaration specifies that the variable i is defined somewhere else. The compiler passes the external variable to be resolved by the linker. So compiler doesn't find an error. During linking the linker searches for the definition of i. Since it is not found the linker flags an error.
43. main()
{
printf("%d", out);
}
int out=100;
Answer:
Compiler error: undefined symbol out in function main.
Explanation:
The rule is that a variable is available for use from the point of declaration. Even though a is a global variable, it is not available for main. Hence an error.
{
printf("%d", out);
}
int out=100;
Answer:
Compiler error: undefined symbol out in function main.
Explanation:
The rule is that a variable is available for use from the point of declaration. Even though a is a global variable, it is not available for main. Hence an error.
predict the output or error(s) for the following:
44. main()
{
extern out;
printf("%d", out);
}
int out=100;
Answer:
100
Explanation:
This is the correct way of writing the previous program.
44. main()
{
extern out;
printf("%d", out);
}
int out=100;
Answer:
100
Explanation:
This is the correct way of writing the previous program.
45. main()
{
show();
}
void show()
{
printf("I'm the greatest");
}
Answer:
Compier error: Type mismatch in redeclaration of show.
Explanation:
When the compiler sees the function show it doesn't know anything about it. So the default return type (ie, int) is assumed. But when compiler sees the actual definition of show mismatch occurs since it is declared as void. Hence the error.
The solutions are as follows:
1. declare void show() in main() .
2. define show() before main().
3. declare extern void show() before the use of show().
{
show();
}
void show()
{
printf("I'm the greatest");
}
Answer:
Compier error: Type mismatch in redeclaration of show.
Explanation:
When the compiler sees the function show it doesn't know anything about it. So the default return type (ie, int) is assumed. But when compiler sees the actual definition of show mismatch occurs since it is declared as void. Hence the error.
The solutions are as follows:
1. declare void show() in main() .
2. define show() before main().
3. declare extern void show() before the use of show().
46. main( )
{
int a[2][3][2] = {{{2,4},{7,8},{3,4}},{{2,2},{2,3},{3,4}}};
printf(“%u %u %u %d \n”,a,*a,**a,***a);
printf(“%u %u %u %d \n”,a+1,*a+1,**a+1,***a+1);
}
Answer:
100, 100, 100, 2
114, 104, 102, 3
{
int a[2][3][2] = {{{2,4},{7,8},{3,4}},{{2,2},{2,3},{3,4}}};
printf(“%u %u %u %d \n”,a,*a,**a,***a);
printf(“%u %u %u %d \n”,a+1,*a+1,**a+1,***a+1);
}
Answer:
100, 100, 100, 2
114, 104, 102, 3
47. main( )
{
int a[ ] = {10,20,30,40,50},j,*p;
for(j=0; j<5 j="" strong="">
{
printf(“%d” ,*a);
a++;
}
p = a;
for(j=0; j<5 j="" strong="">
{
printf(“%d ” ,*p);
p++;
}
}
Answer:
Compiler error: lvalue required.
Explanation:
Error is in line with statement a++. The operand must be an lvalue and may be of any of scalar type for the any operator, array name only when subscripted is an lvalue. Simply array name is a non-modifiable lvalue.
{
int a[ ] = {10,20,30,40,50},j,*p;
for(j=0; j<5 j="" strong="">
{
printf(“%d” ,*a);
a++;
}
p = a;
for(j=0; j<5 j="" strong="">
{
printf(“%d ” ,*p);
p++;
}
}
Answer:
Compiler error: lvalue required.
Explanation:
Error is in line with statement a++. The operand must be an lvalue and may be of any of scalar type for the any operator, array name only when subscripted is an lvalue. Simply array name is a non-modifiable lvalue.
48. main( )
{
static int a[ ] = {0,1,2,3,4};
int *p[ ] = {a,a+1,a+2,a+3,a+4};
int **ptr = p;
ptr++;
printf(“\n %d %d %d”, ptr-p, *ptr-a, **ptr);
*ptr++;
printf(“\n %d %d %d”, ptr-p, *ptr-a, **ptr);
*++ptr;
printf(“\n %d %d %d”, ptr-p, *ptr-a, **ptr);
++*ptr;
printf(“\n %d %d %d”, ptr-p, *ptr-a, **ptr);
}
Answer:
111
222
333
344
{
static int a[ ] = {0,1,2,3,4};
int *p[ ] = {a,a+1,a+2,a+3,a+4};
int **ptr = p;
ptr++;
printf(“\n %d %d %d”, ptr-p, *ptr-a, **ptr);
*ptr++;
printf(“\n %d %d %d”, ptr-p, *ptr-a, **ptr);
*++ptr;
printf(“\n %d %d %d”, ptr-p, *ptr-a, **ptr);
++*ptr;
printf(“\n %d %d %d”, ptr-p, *ptr-a, **ptr);
}
Answer:
111
222
333
344
49. main( )
{
void *vp;
char ch = ‘g’, *cp = “goofy”;
int j = 20;
vp = &ch;
printf(“%c”, *(char *)vp);
vp = &j;
printf(“%d”,*(int *)vp);
vp = cp;
printf(“%s”,(char *)vp + 3);
}
Answer:
g20fy
Explanation:
Since a void pointer is used it can be type casted to any other type pointer. vp = &ch stores address of char ch and the next statement prints the value stored in vp after type casting it to the proper data type pointer. the output is ‘g’. Similarly the output from second printf is ‘20’. The third printf statement type casts it to print the string from the 4th value hence the output is ‘fy’.
{
void *vp;
char ch = ‘g’, *cp = “goofy”;
int j = 20;
vp = &ch;
printf(“%c”, *(char *)vp);
vp = &j;
printf(“%d”,*(int *)vp);
vp = cp;
printf(“%s”,(char *)vp + 3);
}
Answer:
g20fy
Explanation:
Since a void pointer is used it can be type casted to any other type pointer. vp = &ch stores address of char ch and the next statement prints the value stored in vp after type casting it to the proper data type pointer. the output is ‘g’. Similarly the output from second printf is ‘20’. The third printf statement type casts it to print the string from the 4th value hence the output is ‘fy’.
50. main ( )
{
static char *s[ ] = {“black”, “white”, “yellow”, “violet”};
char **ptr[ ] = {s+3, s+2, s+1, s}, ***p;
p = ptr;
**++p;
printf(“%s”,*--*++p + 3);
}
Answer:
ck
Explanation:
In this problem we have an array of char pointers pointing to start of 4 strings. Then we have ptr which is a pointer to a pointer of type char and a variable p which is a pointer to a pointer to a pointer of type char. p hold the initial value of ptr, i.e. p = s+3. The next statement increment value in p by 1 , thus now value of p = s+2. In the printf statement the expression is evaluated *++p causes gets value s+1 then the pre decrement is executed and we get s+1 – 1 = s . the indirection operator now gets the value from the array of s and adds 3 to the starting address. The string is printed starting from this position. Thus, the output is ‘ck’.
{
static char *s[ ] = {“black”, “white”, “yellow”, “violet”};
char **ptr[ ] = {s+3, s+2, s+1, s}, ***p;
p = ptr;
**++p;
printf(“%s”,*--*++p + 3);
}
Answer:
ck
Explanation:
In this problem we have an array of char pointers pointing to start of 4 strings. Then we have ptr which is a pointer to a pointer of type char and a variable p which is a pointer to a pointer to a pointer of type char. p hold the initial value of ptr, i.e. p = s+3. The next statement increment value in p by 1 , thus now value of p = s+2. In the printf statement the expression is evaluated *++p causes gets value s+1 then the pre decrement is executed and we get s+1 – 1 = s . the indirection operator now gets the value from the array of s and adds 3 to the starting address. The string is printed starting from this position. Thus, the output is ‘ck’.
51. main()
{
int i, n;
char *x = “girl”;
n = strlen(x);
*x = x[n];
for(i=0; i
{
printf(“%s\n”,x);
x++;
}
}
Answer:
(blank space)
irl
rl
l
Explanation:
Here a string (a pointer to char) is initialized with a value “girl”. The strlen function returns the length of the string, thus n has a value 4. The next statement assigns value at the nth location (‘\0’) to the first location. Now the string becomes “\0irl” . Now the printf statement prints the string after each iteration it increments it starting position. Loop starts from 0 to 4. The first time x[0] = ‘\0’ hence it prints nothing and pointer value is incremented. The second time it prints from x[1] i.e “irl” and the third time it prints “rl” and the last time it prints “l” and the loop terminates.
{
int i, n;
char *x = “girl”;
n = strlen(x);
*x = x[n];
for(i=0; i
{
printf(“%s\n”,x);
x++;
}
}
Answer:
(blank space)
irl
rl
l
Explanation:
Here a string (a pointer to char) is initialized with a value “girl”. The strlen function returns the length of the string, thus n has a value 4. The next statement assigns value at the nth location (‘\0’) to the first location. Now the string becomes “\0irl” . Now the printf statement prints the string after each iteration it increments it starting position. Loop starts from 0 to 4. The first time x[0] = ‘\0’ hence it prints nothing and pointer value is incremented. The second time it prints from x[1] i.e “irl” and the third time it prints “rl” and the last time it prints “l” and the loop terminates.
Predict the output or error(s) for the following:
52. int i,j;
for(i=0;i<=10;i++)
{
j+=5;
assert(i<5 strong="">
}
Answer:
Runtime error: Abnormal program termination.
assert failed (i<5 br="">
Explanation:
asserts are used during debugging to make sure that certain conditions are satisfied. If assertion fails, the program will terminate reporting the same. After debugging use,
#undef NDEBUG
and this will disable all the assertions from the source code. Assertion
is a good debugging tool to make use of.
52. int i,j;
for(i=0;i<=10;i++)
{
j+=5;
assert(i<5 strong="">
}
Answer:
Runtime error: Abnormal program termination.
assert failed (i<5 br="">
Explanation:
asserts are used during debugging to make sure that certain conditions are satisfied. If assertion fails, the program will terminate reporting the same. After debugging use,
#undef NDEBUG
and this will disable all the assertions from the source code. Assertion
is a good debugging tool to make use of.
53. main()
{
int i=-1;
+i;
printf("i = %d, +i = %d \n",i,+i);
}
Answer:
i = -1, +i = -1
Explanation:
Unary + is the only dummy operator in C. Where-ever it comes you can just ignore it just because it has no effect in the expressions (hence the name dummy operator).
{
int i=-1;
+i;
printf("i = %d, +i = %d \n",i,+i);
}
Answer:
i = -1, +i = -1
Explanation:
Unary + is the only dummy operator in C. Where-ever it comes you can just ignore it just because it has no effect in the expressions (hence the name dummy operator).
54. What are the files which are automatically opened when a C file is executed?
Answer:
stdin, stdout, stderr (standard input,standard output,standard error).
Answer:
stdin, stdout, stderr (standard input,standard output,standard error).
55. what will be the position of the file marker?
a: fseek(ptr,0,SEEK_SET);
b: fseek(ptr,0,SEEK_CUR);
Answer :
a: The SEEK_SET sets the file position marker to the starting of the file.
b: The SEEK_CUR sets the file position marker to the current position
of the file.
a: fseek(ptr,0,SEEK_SET);
b: fseek(ptr,0,SEEK_CUR);
Answer :
a: The SEEK_SET sets the file position marker to the starting of the file.
b: The SEEK_CUR sets the file position marker to the current position
of the file.
56. main()
{
char name[10],s[12];
scanf(" \"%[^\"]\"",s);
}
How scanf will execute?
Answer:
First it checks for the leading white space and discards it.Then it matches with a quotation mark and then it reads all character upto another quotation mark.
{
char name[10],s[12];
scanf(" \"%[^\"]\"",s);
}
How scanf will execute?
Answer:
First it checks for the leading white space and discards it.Then it matches with a quotation mark and then it reads all character upto another quotation mark.
57. What is the problem with the following code segment?
while ((fgets(receiving array,50,file_ptr)) != EOF)
;
Answer & Explanation:
fgets returns a pointer. So the correct end of file check is checking for != NULL.
while ((fgets(receiving array,50,file_ptr)) != EOF)
;
Answer & Explanation:
fgets returns a pointer. So the correct end of file check is checking for != NULL.
58. main()
{
main();
}
Answer:
Runtime error : Stack overflow.
Explanation:
main function calls itself again and again. Each time the function is called its return address is stored in the call stack. Since there is no condition to terminate the function call, the call stack overflows at runtime. So it terminates the program and results in an error.
{
main();
}
Answer:
Runtime error : Stack overflow.
Explanation:
main function calls itself again and again. Each time the function is called its return address is stored in the call stack. Since there is no condition to terminate the function call, the call stack overflows at runtime. So it terminates the program and results in an error.
59. main()
{
char *cptr,c;
void *vptr,v;
c=10; v=0;
cptr=&c; vptr=&v;
printf("%c%v",c,v);
}
Answer:
Compiler error (at line number 4): size of v is Unknown.
Explanation:
You can create a variable of type void * but not of type void, since void is an empty type. In the second line you are creating variable vptr of type void * and v of type void hence an error.
{
char *cptr,c;
void *vptr,v;
c=10; v=0;
cptr=&c; vptr=&v;
printf("%c%v",c,v);
}
Answer:
Compiler error (at line number 4): size of v is Unknown.
Explanation:
You can create a variable of type void * but not of type void, since void is an empty type. In the second line you are creating variable vptr of type void * and v of type void hence an error.
60. main()
{
char *str1="abcd";
char str2[]="abcd";
printf("%d %d %d",sizeof(str1),sizeof(str2),sizeof("abcd"));
}
Answer:
2 5 5
Explanation:
In first sizeof, str1 is a character pointer so it gives you the size of the pointer variable. In second sizeof the name str2 indicates the name of the array whose size is 5 (including the '\0' termination character). The third sizeof is similar to the second one.
{
char *str1="abcd";
char str2[]="abcd";
printf("%d %d %d",sizeof(str1),sizeof(str2),sizeof("abcd"));
}
Answer:
2 5 5
Explanation:
In first sizeof, str1 is a character pointer so it gives you the size of the pointer variable. In second sizeof the name str2 indicates the name of the array whose size is 5 (including the '\0' termination character). The third sizeof is similar to the second one.
61. main()
{
char not;
not=!2;
printf("%d",not);
}
Answer:
0
Explanation:
! is a logical operator. In C the value 0 is considered to be the boolean value FALSE, and any non-zero value is considered to be the boolean value TRUE. Here 2 is a non-zero value so TRUE. !TRUE is FALSE (0) so it prints 0.
{
char not;
not=!2;
printf("%d",not);
}
Answer:
0
Explanation:
! is a logical operator. In C the value 0 is considered to be the boolean value FALSE, and any non-zero value is considered to be the boolean value TRUE. Here 2 is a non-zero value so TRUE. !TRUE is FALSE (0) so it prints 0.
62. #define FALSE -1
#define TRUE 1
#define NULL 0
main() {
if(NULL)
puts("NULL");
else if(FALSE)
puts("TRUE");
else
puts("FALSE");
}
Answer:
TRUE
Explanation:
The input program to the compiler after processing by the preprocessor is,
main(){
if(0)
puts("NULL");
else if(-1)
puts("TRUE");
else
puts("FALSE");
}
Preprocessor doesn't replace the values given inside the double quotes. The check by if condition is boolean value false so it goes to else. In second if -1 is boolean value true hence "TRUE" is printed.
#define TRUE 1
#define NULL 0
main() {
if(NULL)
puts("NULL");
else if(FALSE)
puts("TRUE");
else
puts("FALSE");
}
Answer:
TRUE
Explanation:
The input program to the compiler after processing by the preprocessor is,
main(){
if(0)
puts("NULL");
else if(-1)
puts("TRUE");
else
puts("FALSE");
}
Preprocessor doesn't replace the values given inside the double quotes. The check by if condition is boolean value false so it goes to else. In second if -1 is boolean value true hence "TRUE" is printed.
Predict the output or error(s) for the following:
63. main()
{
int k=1;
printf("%d==1 is ""%s",k,k==1?"TRUE":"FALSE");
}
Answer:
1==1 is TRUE
Explanation:
When two strings are placed together (or separated by white-space) they are concatenated (this is called as "stringization" operation). So the string is as if it is given as "%d==1 is %s". The conditional operator( ?: ) evaluates to "TRUE".
63. main()
{
int k=1;
printf("%d==1 is ""%s",k,k==1?"TRUE":"FALSE");
}
Answer:
1==1 is TRUE
Explanation:
When two strings are placed together (or separated by white-space) they are concatenated (this is called as "stringization" operation). So the string is as if it is given as "%d==1 is %s". The conditional operator( ?: ) evaluates to "TRUE".
64. main()
{
int y;
scanf("%d",&y); // input given is 2000
if( (y%4==0 && y%100 != 0) || y%100 == 0 )
printf("%d is a leap year");
else
printf("%d is not a leap year");
}
Answer:
2000 is a leap year
Explanation:
An ordinary program to check if leap year or not.
{
int y;
scanf("%d",&y); // input given is 2000
if( (y%4==0 && y%100 != 0) || y%100 == 0 )
printf("%d is a leap year");
else
printf("%d is not a leap year");
}
Answer:
2000 is a leap year
Explanation:
An ordinary program to check if leap year or not.
65. #define max 5
#define int arr1[max]
main()
{
typedef char arr2[max];
arr1 list={0,1,2,3,4};
arr2 name="name";
printf("%d %s",list[0],name);
}
Answer:
Compiler error (in the line arr1 list = {0,1,2,3,4})
Explanation:
arr2 is declared of type array of size 5 of characters. So it can be used to declare the variable name of the type arr2. But it is not the case of arr1. Hence an error.
Rule of Thumb:
#defines are used for textual replacement whereas typedefs are used for declaring new types.
#define int arr1[max]
main()
{
typedef char arr2[max];
arr1 list={0,1,2,3,4};
arr2 name="name";
printf("%d %s",list[0],name);
}
Answer:
Compiler error (in the line arr1 list = {0,1,2,3,4})
Explanation:
arr2 is declared of type array of size 5 of characters. So it can be used to declare the variable name of the type arr2. But it is not the case of arr1. Hence an error.
Rule of Thumb:
#defines are used for textual replacement whereas typedefs are used for declaring new types.
66. int i=10;
main()
{
extern int i;
{
int i=20;
{
const volatile unsigned i=30;
printf("%d",i);
}
printf("%d",i);
}
printf("%d",i);
}
Answer:
30,20,10
Explanation:
'{' introduces new block and thus new scope. In the innermost block i is declared as,
const volatile unsigned
which is a valid declaration. i is assumed of type int. So printf prints 30. In the next block, i has value 20 and so printf prints 20. In the outermost block, i is declared as extern, so no storage space is allocated for it. After compilation is over the linker resolves it to global variable i (since it is the only variable visible there). So it prints i's value as 10.
main()
{
extern int i;
{
int i=20;
{
const volatile unsigned i=30;
printf("%d",i);
}
printf("%d",i);
}
printf("%d",i);
}
Answer:
30,20,10
Explanation:
'{' introduces new block and thus new scope. In the innermost block i is declared as,
const volatile unsigned
which is a valid declaration. i is assumed of type int. So printf prints 30. In the next block, i has value 20 and so printf prints 20. In the outermost block, i is declared as extern, so no storage space is allocated for it. After compilation is over the linker resolves it to global variable i (since it is the only variable visible there). So it prints i's value as 10.
67. main()
{
int *j;
{
int i=10;
j=&i;
}
printf("%d",*j);
}
Answer:
10
Explanation:
The variable i is a block level variable and the visibility is inside that block only. But the lifetime of i is lifetime of the function so it lives upto the exit of main function. Since the i is still allocated space, *j prints the value stored in i since j points i.
{
int *j;
{
int i=10;
j=&i;
}
printf("%d",*j);
}
Answer:
10
Explanation:
The variable i is a block level variable and the visibility is inside that block only. But the lifetime of i is lifetime of the function so it lives upto the exit of main function. Since the i is still allocated space, *j prints the value stored in i since j points i.
68. main()
{
int i=-1;
-i;
printf("i = %d, -i = %d \n",i,-i);
}
Answer:
i = -1, -i = 1
Explanation:
-i is executed and this execution doesn't affect the value of i. In printf first you just print the value of i. After that the value of the expression -i = -(-1) is printed.
{
int i=-1;
-i;
printf("i = %d, -i = %d \n",i,-i);
}
Answer:
i = -1, -i = 1
Explanation:
-i is executed and this execution doesn't affect the value of i. In printf first you just print the value of i. After that the value of the expression -i = -(-1) is printed.
69. #include
main()
{
const int i=4;
float j;
j = ++i;
printf("%d %f", i,++j);
}
Answer:
Compiler error
Explanation:
i is a constant. you cannot change the value of constant
main()
{
const int i=4;
float j;
j = ++i;
printf("%d %f", i,++j);
}
Answer:
Compiler error
Explanation:
i is a constant. you cannot change the value of constant
70. #include
main()
{
int a[2][2][2] = { {10,2,3,4}, {5,6,7,8} };
int *p,*q;
p=&a[2][2][2];
*q=***a;
printf("%d..%d",*p,*q);
}
Answer:
garbagevalue..1
Explanation:
p=&a[2][2][2] you declare only two 2D arrays. but you are trying to access the third 2D(which you are not declared) it will print garbage values. *q=***a starting address of a is assigned integer pointer. now q is pointing to starting address of a.if you print *q meAnswer:it will print first element of 3D array.
main()
{
int a[2][2][2] = { {10,2,3,4}, {5,6,7,8} };
int *p,*q;
p=&a[2][2][2];
*q=***a;
printf("%d..%d",*p,*q);
}
Answer:
garbagevalue..1
Explanation:
p=&a[2][2][2] you declare only two 2D arrays. but you are trying to access the third 2D(which you are not declared) it will print garbage values. *q=***a starting address of a is assigned integer pointer. now q is pointing to starting address of a.if you print *q meAnswer:it will print first element of 3D array.
71. #include
main()
{
register i=5;
char j[]= "hello";
printf("%s %d",j,i);
}
Answer:
hello 5
Explanation:
if you declare i as register compiler will treat it as ordinary integer and it will take integer value. i value may be stored either in register or in memory.
main()
{
register i=5;
char j[]= "hello";
printf("%s %d",j,i);
}
Answer:
hello 5
Explanation:
if you declare i as register compiler will treat it as ordinary integer and it will take integer value. i value may be stored either in register or in memory.
72. main()
{
int i=5,j=6,z;
printf("%d",i+++j);
}
Answer:
11
Explanation:
the expression i+++j is treated as (i++ + j)
{
int i=5,j=6,z;
printf("%d",i+++j);
}
Answer:
11
Explanation:
the expression i+++j is treated as (i++ + j)
Tuesday, 3 September 2013
C Aptitude Questions and Answers(Part-1)
Predict the output or error(s)
for the following:
1. void main()
{
int const * p=5;
printf("%d",++(*p));
}
Answer:
Compiler error: Cannot modify a constant value.
Explanation:
p is a pointer to a "constant integer". But we tried to change the value of the "constant integer".
1. void main()
{
int const * p=5;
printf("%d",++(*p));
}
Answer:
Compiler error: Cannot modify a constant value.
Explanation:
p is a pointer to a "constant integer". But we tried to change the value of the "constant integer".
2. main()
{
char s[ ]="man";
int i;
for(i=0;s[ i ];i++)
printf("\n%c%c%c%c",s[ i ],*(s+i),*(i+s),i[s]);
}
Answer:
mmmm
aaaa
nnnn
Explanation:
s[i], *(i+s), *(s+i), i[s] are all different ways of expressing the same idea. Generally array name is the base address for that array. Here s is the base address. i is the index number/displacement from the base address. So, indirecting it with * is same as s[i]. i[s] may be surprising. But in the case of C it is same as s[i].
{
char s[ ]="man";
int i;
for(i=0;s[ i ];i++)
printf("\n%c%c%c%c",s[ i ],*(s+i),*(i+s),i[s]);
}
Answer:
mmmm
aaaa
nnnn
Explanation:
s[i], *(i+s), *(s+i), i[s] are all different ways of expressing the same idea. Generally array name is the base address for that array. Here s is the base address. i is the index number/displacement from the base address. So, indirecting it with * is same as s[i]. i[s] may be surprising. But in the case of C it is same as s[i].
3. main()
{
float me = 1.1;
double you = 1.1;
if(me==you)
printf("I love U");
else
printf("I hate U");
}
Answer:
I hate U
Explanation:
For floating point numbers (float, double, long double) the values cannot be predicted exactly. Depending on the number of bytes, the precession with of the value represented varies. Float takes 4 bytes and long double takes 10 bytes. So float stores 0.9 with less precision than long double.
Rule of Thumb:
Never compare or at-least be cautious when using floating point numbers with relational operators (== , >, <, <=, >=,!= ) .
{
float me = 1.1;
double you = 1.1;
if(me==you)
printf("I love U");
else
printf("I hate U");
}
Answer:
I hate U
Explanation:
For floating point numbers (float, double, long double) the values cannot be predicted exactly. Depending on the number of bytes, the precession with of the value represented varies. Float takes 4 bytes and long double takes 10 bytes. So float stores 0.9 with less precision than long double.
Rule of Thumb:
Never compare or at-least be cautious when using floating point numbers with relational operators (== , >, <, <=, >=,!= ) .
4. main()
{
static int var = 5;
printf("%d ",var--);
if(var)
main();
}
Answer:
5 4 3 2 1
Explanation:
When static storage class is given, it is initialized once. The change in the value of a static variable is retained even between the function calls. Main is also treated like any other ordinary function, which can be called recursively.
{
static int var = 5;
printf("%d ",var--);
if(var)
main();
}
Answer:
5 4 3 2 1
Explanation:
When static storage class is given, it is initialized once. The change in the value of a static variable is retained even between the function calls. Main is also treated like any other ordinary function, which can be called recursively.
5. main()
{
int c[ ]={2.8,3.4,4,6.7,5};
int j,*p=c,*q=c;
for(j=0;j<5 j="" strong="">
printf(" %d ",*c);
++q; }
for(j=0;j<5 j="" strong="">
printf(" %d ",*p);
++p; }
}
Answer:
2 2 2 2 2 2 3 4 6 5
Explanation:
Initially pointer c is assigned to both p and q. In the first loop, since only q is incremented and not c , the value 2 will be printed 5 times. In second loop p itself is incremented. So the values 2 3 4 6 5 will be printed.
{
int c[ ]={2.8,3.4,4,6.7,5};
int j,*p=c,*q=c;
for(j=0;j<5 j="" strong="">
printf(" %d ",*c);
++q; }
for(j=0;j<5 j="" strong="">
printf(" %d ",*p);
++p; }
}
Answer:
2 2 2 2 2 2 3 4 6 5
Explanation:
Initially pointer c is assigned to both p and q. In the first loop, since only q is incremented and not c , the value 2 will be printed 5 times. In second loop p itself is incremented. So the values 2 3 4 6 5 will be printed.
6. main()
{
extern int i;
i=20;
printf("%d",i);
}
Answer:
Linker Error : Undefined symbol '_i'
Explanation:
extern storage class in the following declaration,
extern int i;
specifies to the compiler that the memory for i is allocated in some other program and that address will be given to the current program at the time of linking. But linker finds that no other variable of name i is available in any other program with memory space allocated for it. Hence a linker error has occurred .
{
extern int i;
i=20;
printf("%d",i);
}
Answer:
Linker Error : Undefined symbol '_i'
Explanation:
extern storage class in the following declaration,
extern int i;
specifies to the compiler that the memory for i is allocated in some other program and that address will be given to the current program at the time of linking. But linker finds that no other variable of name i is available in any other program with memory space allocated for it. Hence a linker error has occurred .
Predict the output or error(s)
for the following:
7. main()
{
int i=-1,j=-1,k=0,l=2,m;
m=i++&&j++&&k++||l++;
printf("%d %d %d %d %d",i,j,k,l,m);
}
Answer:
0 0 1 3 1
Explanation :
Logical operations always give a result of 1 or 0 . And also the logical AND (&&) operator has higher priority over the logical OR (||) operator. So the expression ‘i++ && j++ && k++’ is executed first. The result of this expression is 0 (-1 && -1 && 0 = 0). Now the expression is 0 || 2 which evaluates to 1 (because OR operator always gives 1 except for ‘0 || 0’ combination- for which it gives 0). So the value of m is 1. The values of other variables are also incremented by 1.
7. main()
{
int i=-1,j=-1,k=0,l=2,m;
m=i++&&j++&&k++||l++;
printf("%d %d %d %d %d",i,j,k,l,m);
}
Answer:
0 0 1 3 1
Explanation :
Logical operations always give a result of 1 or 0 . And also the logical AND (&&) operator has higher priority over the logical OR (||) operator. So the expression ‘i++ && j++ && k++’ is executed first. The result of this expression is 0 (-1 && -1 && 0 = 0). Now the expression is 0 || 2 which evaluates to 1 (because OR operator always gives 1 except for ‘0 || 0’ combination- for which it gives 0). So the value of m is 1. The values of other variables are also incremented by 1.
8. main()
{
char *p;
printf("%d %d ",sizeof(*p),sizeof(p));
}
Answer:
1 2
Explanation:
The sizeof() operator gives the number of bytes taken by its operand. P is a character pointer, which needs one byte for storing its value (a character). Hence sizeof(*p) gives a value of 1. Since it needs two bytes to store the address of the character pointer sizeof(p) gives 2.
{
char *p;
printf("%d %d ",sizeof(*p),sizeof(p));
}
Answer:
1 2
Explanation:
The sizeof() operator gives the number of bytes taken by its operand. P is a character pointer, which needs one byte for storing its value (a character). Hence sizeof(*p) gives a value of 1. Since it needs two bytes to store the address of the character pointer sizeof(p) gives 2.
9. main()
{
int i=3;
switch(i)
{
default:printf("zero");
case 1: printf("one");
break;
case 2:printf("two");
break;
case 3: printf("three");
break;
}
}
Answer :
three
Explanation :
The default case can be placed anywhere inside the loop. It is executed only when all other cases doesn't match.
{
int i=3;
switch(i)
{
default:printf("zero");
case 1: printf("one");
break;
case 2:printf("two");
break;
case 3: printf("three");
break;
}
}
Answer :
three
Explanation :
The default case can be placed anywhere inside the loop. It is executed only when all other cases doesn't match.
10. main()
{
printf("%x",-1<<4 strong="">
}
Answer:
fff0
Explanation :
-1 is internally represented as all 1's. When left shifted four times the least significant 4 bits are filled with 0's.The %x format specifier specifies that the integer value be printed as a hexadecimal value.
{
printf("%x",-1<<4 strong="">
}
Answer:
fff0
Explanation :
-1 is internally represented as all 1's. When left shifted four times the least significant 4 bits are filled with 0's.The %x format specifier specifies that the integer value be printed as a hexadecimal value.
11. main()
{
char string[]="Hello World";
display(string);
}
void display(char *string)
{
printf("%s",string);
}
Answer:
Compiler Error : Type mismatch in redeclaration of function display
Explanation :
In third line, when the function display is encountered, the compiler doesn't know anything about the function display. It assumes the arguments and return types to be integers, (which is the default type). When it sees the actual function display, the arguments and type contradicts with what it has assumed previously. Hence a compile time error occurs.
12. main(){
char string[]="Hello World";
display(string);
}
void display(char *string)
{
printf("%s",string);
}
Answer:
Compiler Error : Type mismatch in redeclaration of function display
Explanation :
In third line, when the function display is encountered, the compiler doesn't know anything about the function display. It assumes the arguments and return types to be integers, (which is the default type). When it sees the actual function display, the arguments and type contradicts with what it has assumed previously. Hence a compile time error occurs.
{
int c=- -2;
printf("c=%d",c);
}
Answer:
c=2;
Explanation:
Here unary minus (or negation) operator is used twice. Same maths rules applies, ie. minus * minus= plus.
Note:
However you cannot give like --2. Because -- operator can only be applied to variables as a decrement operator (eg., i--). 2 is a constant and not a variable.
13. #define int char
main()
{
int i=65;
printf("sizeof(i)=%d",sizeof(i));
}
Answer:
sizeof(i)=1
Explanation:
Since the #define replaces the string int by the macro char
14. main()
{
int i=10;
i=!i>14;
Printf ("i=%d",i);
}
Answer:
i=0
Explanation:
In the expression !i>14 , NOT (!) operator has more precedence than ‘ >’ symbol. ! is a unary logical operator. !i (!10) is 0 (not of true is false). 0>14 is false (zero).
Predict the output or error(s)
for the following:
15. #include
main()
{
char s[]={'a','b','c','\n','c','\0'};
char *p,*str,*str1;
p=&s[3];
str=p;
str1=s;
printf("%d",++*p + ++*str1-32);
}
Answer:
77
Explanation:
p is pointing to character '\n'. str1 is pointing to character 'a' ++*p. "p is pointing to '\n' and that is incremented by one." the ASCII value of '\n' is 10, which is then incremented to 11. The value of ++*p is 11. ++*str1, str1 is pointing to 'a' that is incremented by 1 and it becomes 'b'. ASCII value of 'b' is 98.
Now performing (11 + 98 – 32), we get 77("M");
So we get the output 77 :: "M" (Ascii is 77).
15. #include
main()
{
char s[]={'a','b','c','\n','c','\0'};
char *p,*str,*str1;
p=&s[3];
str=p;
str1=s;
printf("%d",++*p + ++*str1-32);
}
Answer:
77
Explanation:
p is pointing to character '\n'. str1 is pointing to character 'a' ++*p. "p is pointing to '\n' and that is incremented by one." the ASCII value of '\n' is 10, which is then incremented to 11. The value of ++*p is 11. ++*str1, str1 is pointing to 'a' that is incremented by 1 and it becomes 'b'. ASCII value of 'b' is 98.
Now performing (11 + 98 – 32), we get 77("M");
So we get the output 77 :: "M" (Ascii is 77).
16. #include
main()
{
int a[2][2][2] = { {10,2,3,4}, {5,6,7,8} };
int *p,*q;
p=&a[2][2][2];
*q=***a;
printf("%d----%d",*p,*q);
}
Answer:
SomeGarbageValue---1
Explanation:
p=&a[2][2][2] you declare only two 2D arrays, but you are trying to access the third 2D(which you are not declared) it will print garbage values. *q=***a starting address of a is assigned integer pointer. Now q is pointing to starting address of a. If you print *q, it will print first element of 3D array.
main()
{
int a[2][2][2] = { {10,2,3,4}, {5,6,7,8} };
int *p,*q;
p=&a[2][2][2];
*q=***a;
printf("%d----%d",*p,*q);
}
Answer:
SomeGarbageValue---1
Explanation:
p=&a[2][2][2] you declare only two 2D arrays, but you are trying to access the third 2D(which you are not declared) it will print garbage values. *q=***a starting address of a is assigned integer pointer. Now q is pointing to starting address of a. If you print *q, it will print first element of 3D array.
17. #include
main()
{
struct xx
{
int x=3;
char name[]="hello";
};
struct xx *s;
printf("%d",s->x);
printf("%s",s->name);
}
Answer:
Compiler Error
Explanation:
You should not initialize variables in declaration
main()
{
struct xx
{
int x=3;
char name[]="hello";
};
struct xx *s;
printf("%d",s->x);
printf("%s",s->name);
}
Answer:
Compiler Error
Explanation:
You should not initialize variables in declaration
18. #include
main()
{
struct xx
{
int x;
struct yy
{
char s;
struct xx *p;
};
struct yy *q;
};
}
Answer:
Compiler Error
Explanation:
The structure yy is nested within structure xx. Hence, the elements are of yy are to be accessed through the instance of structure xx, which needs an instance of yy to be known. If the instance is created after defining the structure the compiler will not know about the instance relative to xx. Hence for nested structure yy you have to declare member.
main()
{
struct xx
{
int x;
struct yy
{
char s;
struct xx *p;
};
struct yy *q;
};
}
Answer:
Compiler Error
Explanation:
The structure yy is nested within structure xx. Hence, the elements are of yy are to be accessed through the instance of structure xx, which needs an instance of yy to be known. If the instance is created after defining the structure the compiler will not know about the instance relative to xx. Hence for nested structure yy you have to declare member.
19. main()
{
printf("\nab");
printf("\bsi");
printf("\rha");
}
Answer:
hai
Explanation:
\n - newline
\b - backspace
\r - linefeed
{
printf("\nab");
printf("\bsi");
printf("\rha");
}
Answer:
hai
Explanation:
\n - newline
\b - backspace
\r - linefeed
20. main()
{
int i=5;
printf("%d%d%d%d%d%d",i++,i--,++i,--i,i);
}
Answer:
45545
Explanation:
The arguments in a function call are pushed into the stack from left to right. The evaluation is by popping out from the stack. and the evaluation is from right to left, hence the result.
{
int i=5;
printf("%d%d%d%d%d%d",i++,i--,++i,--i,i);
}
Answer:
45545
Explanation:
The arguments in a function call are pushed into the stack from left to right. The evaluation is by popping out from the stack. and the evaluation is from right to left, hence the result.
21. #define square(x)
x*x
main()
{
int i;
i = 64/square(4);
printf("%d",i);
}
Answer:
64
Explanation:
the macro call square(4) will substituted by 4*4 so the expression becomes i = 64/4*4 . Since / and * has equal priority the expression will be evaluated as (64/4)*4 i.e. 16*4 = 64
main()
{
int i;
i = 64/square(4);
printf("%d",i);
}
Answer:
64
Explanation:
the macro call square(4) will substituted by 4*4 so the expression becomes i = 64/4*4 . Since / and * has equal priority the expression will be evaluated as (64/4)*4 i.e. 16*4 = 64
22. main()
{
char *p="hai friends",*p1;
p1=p;
while(*p!='\0') ++*p++;
printf("%s %s",p,p1);
}
Answer:
ibj!gsjfoet
Explanation:
++*p++ will be parse in the given order
Ø *p that is value at the location currently pointed by p will be taken
Ø ++*p the retrieved value will be incremented
Ø when ; is encountered the location will be incremented that is p++ will be executed
Hence, in the while loop initial value pointed by p is ‘h’, which is changed to ‘i’ by executing ++*p and pointer moves to point, ‘a’ which is similarly changed to ‘b’ and so on. Similarly blank space is converted to ‘!’. Thus, we obtain value in p becomes “ibj!gsjfoet” and since p reaches ‘\0’ and p1 points to p thus p1doesnot print anything.
{
char *p="hai friends",*p1;
p1=p;
while(*p!='\0') ++*p++;
printf("%s %s",p,p1);
}
Answer:
ibj!gsjfoet
Explanation:
++*p++ will be parse in the given order
Ø *p that is value at the location currently pointed by p will be taken
Ø ++*p the retrieved value will be incremented
Ø when ; is encountered the location will be incremented that is p++ will be executed
Hence, in the while loop initial value pointed by p is ‘h’, which is changed to ‘i’ by executing ++*p and pointer moves to point, ‘a’ which is similarly changed to ‘b’ and so on. Similarly blank space is converted to ‘!’. Thus, we obtain value in p becomes “ibj!gsjfoet” and since p reaches ‘\0’ and p1 points to p thus p1doesnot print anything.
23. #include
#define a 10
main()
{
#define a 50
printf("%d",a);
}
Answer:
50
Explanation:
The preprocessor directives can be redefined anywhere in the program. So the most recently assigned value will be taken.
#define a 10
main()
{
#define a 50
printf("%d",a);
}
Answer:
50
Explanation:
The preprocessor directives can be redefined anywhere in the program. So the most recently assigned value will be taken.
24. #define clrscr() 100
main()
{
clrscr();
printf("%d\n",clrscr());
}
Answer:
100
Explanation:
Preprocessor executes as a seperate pass before the execution of the compiler. So textual replacement of clrscr() to 100 occurs.The input program to compiler looks like this :
main()
{
100;
printf("%d\n",100);
}
Note:
100; is an executable statement but with no action. So it doesn't give any problem
main()
{
clrscr();
printf("%d\n",clrscr());
}
Answer:
100
Explanation:
Preprocessor executes as a seperate pass before the execution of the compiler. So textual replacement of clrscr() to 100 occurs.The input program to compiler looks like this :
main()
{
100;
printf("%d\n",100);
}
Note:
100; is an executable statement but with no action. So it doesn't give any problem
Predict the output or error(s)
for the following:
25. main()
{
printf("%p",main);
}
Answer:
Some address will be printed.
Explanation:
Function names are just addresses (just like array names are addresses).
main() is also a function. So the address of function main will be printed. %p in printf specifies that the argument is an address. They are printed as hexadecimal numbers.
25. main()
{
printf("%p",main);
}
Answer:
Some address will be printed.
Explanation:
Function names are just addresses (just like array names are addresses).
main() is also a function. So the address of function main will be printed. %p in printf specifies that the argument is an address. They are printed as hexadecimal numbers.
26. main()
{
clrscr();
}
clrscr();
Answer:
No output/error
Explanation:
The first clrscr() occurs inside a function. So it becomes a function call. In the second clrscr(); is a function declaration (because it is not inside any function).
{
clrscr();
}
clrscr();
Answer:
No output/error
Explanation:
The first clrscr() occurs inside a function. So it becomes a function call. In the second clrscr(); is a function declaration (because it is not inside any function).
27. enum colors
{BLACK,BLUE,GREEN}
main()
{
printf("%d..%d..%d",BLACK,BLUE,GREEN);
return(1);
}
Answer:
0..1..2
Explanation:
enum assigns numbers starting from 0, if not explicitly defined.
main()
{
printf("%d..%d..%d",BLACK,BLUE,GREEN);
return(1);
}
Answer:
0..1..2
Explanation:
enum assigns numbers starting from 0, if not explicitly defined.
28. void main()
{
char far *farther,*farthest;
printf("%d..%d",sizeof(farther),sizeof(farthest));
}
Answer:
4..2
Explanation:
the second pointer is of char type and not a far pointer
{
char far *farther,*farthest;
printf("%d..%d",sizeof(farther),sizeof(farthest));
}
Answer:
4..2
Explanation:
the second pointer is of char type and not a far pointer
29. main()
{
int i=400,j=300;
printf("%d..%d");
}
Answer:
400..300
Explanation:
printf takes the values of the first two assignments of the program. Any number of printf's may be given. All of them take only the first two values. If more number of assignments given in the program, then printf will take garbage values.
{
int i=400,j=300;
printf("%d..%d");
}
Answer:
400..300
Explanation:
printf takes the values of the first two assignments of the program. Any number of printf's may be given. All of them take only the first two values. If more number of assignments given in the program, then printf will take garbage values.
30. main()
{
char *p;
p="Hello";
printf("%c\n",*&*p);
}
Answer:
H
Explanation:
* is a dereference operator & is a reference operator. They can be applied any number of times provided it is meaningful. Here p points to the first character in the string "Hello". *p dereferences it and so its value is H. Again & references it to an address and * dereferences it to the value H.
{
char *p;
p="Hello";
printf("%c\n",*&*p);
}
Answer:
H
Explanation:
* is a dereference operator & is a reference operator. They can be applied any number of times provided it is meaningful. Here p points to the first character in the string "Hello". *p dereferences it and so its value is H. Again & references it to an address and * dereferences it to the value H.
31. main()
{
int i=1;
while (i<=5)
{
printf("%d",i);
if (i>2)
goto here;
i++;
}
}
fun()
{
here:
printf("PP");
}
Answer:
Compiler error: Undefined label 'here' in function main
Explanation:
Labels have functions scope, in other words The scope of the labels is limited to functions . The label 'here' is available in function fun() Hence it is not visible in function main.
{
int i=1;
while (i<=5)
{
printf("%d",i);
if (i>2)
goto here;
i++;
}
}
fun()
{
here:
printf("PP");
}
Answer:
Compiler error: Undefined label 'here' in function main
Explanation:
Labels have functions scope, in other words The scope of the labels is limited to functions . The label 'here' is available in function fun() Hence it is not visible in function main.
32. main()
{
static char names[5][20]={"pascal","ada","cobol","fortran","perl"};
int i;
char *t;
t=names[3];
names[3]=names[4];
names[4]=t;
for (i=0;i<=4;i++)
printf("%s",names[i]);
}
Answer:
Compiler error: Lvalue required in function main
Explanation:
Array names are pointer constants. So it cannot be modified.
{
static char names[5][20]={"pascal","ada","cobol","fortran","perl"};
int i;
char *t;
t=names[3];
names[3]=names[4];
names[4]=t;
for (i=0;i<=4;i++)
printf("%s",names[i]);
}
Answer:
Compiler error: Lvalue required in function main
Explanation:
Array names are pointer constants. So it cannot be modified.
33. void main()
{
int i=5;
printf("%d",i++ + ++i);
}
Answer:
Output Cannot be predicted exactly.
Explanation:
Side effects are involved in the evaluation of i
{
int i=5;
printf("%d",i++ + ++i);
}
Answer:
Output Cannot be predicted exactly.
Explanation:
Side effects are involved in the evaluation of i
34. void main()
{
int i=5;
printf("%d",i+++++i);
}
Answer:
Compiler Error
Explanation:
The expression i+++++i is parsed as i ++ ++ + i which is an illegal combination of operators.
{
int i=5;
printf("%d",i+++++i);
}
Answer:
Compiler Error
Explanation:
The expression i+++++i is parsed as i ++ ++ + i which is an illegal combination of operators.
35. #include
main()
{
int i=1,j=2;
switch(i)
{
case 1: printf("GOOD");
break;
case j: printf("BAD");
break;
}
}
Answer:
Compiler Error: Constant expression required in function main.
Explanation:
The case statement can have only constant expressions (this implies that we cannot use variable names directly so an error).
Note:
Enumerated types can be used in case statements.
main()
{
int i=1,j=2;
switch(i)
{
case 1: printf("GOOD");
break;
case j: printf("BAD");
break;
}
}
Answer:
Compiler Error: Constant expression required in function main.
Explanation:
The case statement can have only constant expressions (this implies that we cannot use variable names directly so an error).
Note:
Enumerated types can be used in case statements.
Subscribe to:
Posts (Atom)
Popular Posts
-
ஓர் எறும்புக்கு முன்னால் எந்தத் தடைகளை நீங்கள் வைத்தாலும் அது அடியில் சென்றோ அல்லது மேலால் சென்றோ, அல்லது சுற்றிச் சென்றோ தடைகளை கடக்கும... -
10144GE003 PRINCIPLES OF MANAGEMENT L T P C-3 0 0 3 UNIT I OVERVIEW OF MANAGEMENT 9 Definition Management - Role of managers -...
-
Download-Deivangal ellam Thotre Pogum.mp3 Dheivangal Ellaam Thotre Poogum Thanthai Anbin Munne Thallatu Paadum Thaain Anbum Thanth... -
அன்னையின் கருவில் கலையாமல் பிறந்தாயே அப்போதே மனிதா நீ ஜெயித்தாயே (2) கஷ்டங்கள் தாங்கு வெற்றி உண்டு மேடும் பள்ளம் தானே வாழ்க்க... -
ECE Department Question Bank Subject Name : ANTENNAS AND WAVE PROPAGATION Branch:ECE Subject...
